Not sure, depends on the format, who’s interested etc.
Probably at least a two part venture:
Through hole and wires
Basic hand SMD.
So there’d be probably be two things to build, one non-SMD and one SMD. Possibly add a third ‘challenge’ board with more difficult things to solder. Components and PCBs are both cheap and quite straightforward.
Tools on the other hand are not so straightforward. I need to have a look at what MHV has available and in what condition.
We have plenty of equipment as we run the hardware hacking village at the B sides conference. From memory there is a soulderinf station setup for about ten people.
I’m a broadcast engineer tech that did around 5 years solid soldering on printed circuit assemblies. I could probably run a workshop with some supplies.
I was meaning to make an appearance at electronics Wednesday but my laziness during this cold weather got the better of me.
I’ll strive to make an appearance at MHV to introduce myself. Just not sure when would best suit?
Thanks for taking an interest in this, I hear you on the cold front it is nice just to stay at home sometimes.
We are open on Tuesday nights from around 6.30 until 9-9:30 depending on what is happening. Then there is also Electronic Wednesdays which is the same times.
Of other interest to you (or maybe not) there is a few of us who are into radio who are meeting up on the first Monday of the month. Currently we are studying for our full amateur licenses so it is a bit slow, however we hope this will grow over time.